3G GPS Tracker Dog Collar Pet GPS Tracker RF-V40 No Box
3G GPS tracker dog collar pet gps tracker RF-V40 No box
- WCDMA 3G + GSM +Wifi Global Locating
- Waterproof grade IP66
- Smart rolling LED light on/off according to surroundings
- WiFi safety zone ,30m indoors accuracy
- Tracking via Website / APP/ Wechat / SMS
- Trajectory playback / Geo-fence
- Voice monitor &Low battery reminders
- 1* GPS anti-lost host
- 1* USB Magnetic charging cable
- 1* Back splint charger
- 1* User manual
2G GSM network:850/900/1800/1900MHz
3G WCDMA network: 850/1900MHz Or
Please choose the right frequency bands (alternative) according to use area.
GPRS Standard: Class 12, TCP/IP
GPS locating time:30sec with cold boot (open sky)
29sec with warm boot (open sky)
5sec with hot boot (open sky)
GPS positioning accuracy:10-15m (open sky)
Wifi positioning accuracy: 0-30m (wifi covered area)
Working temperature:-20ºC ~ +45ºC
Working humidity:5% ~ 95% RH
Host size:56*60*16mm Host weight:45g
Step 1. Prepare for work :
The GPS positioning function of this device request to choose 3G WCDMA network-based Micro-SIM card (same as Iphone4) and please be sure the GPRS data traffic and Caller ID functions have been activated, and close the PIN code function.
Step 2. Host power on /off :
1. Please insert the Micro-SIM card into the card slot as
2. Press the POWER key for 3-5sec, then the tracker lights on.(Blue and Red)
3. In the state of power-on ,press power button for 3 times ,the front blue and red lights fast flash 3 times and off, then the device shutdown.
Indicator light instructions:
|Light color||Function||Slow flash||Fast flash||Close|
|Blue -left 2||GPS indicator||locating||success||sleeping|
|Red-left 3||GSM indicator||network searching||success||sleeping|
1. GPS indicator and GSM indicator lights:
2. Four smart rolling LED light with tri-colors : when the environment gets dark, LED flash on automatically. Wearer's activity status becomes easier to be observed.
Step 3. APP banding and function setting:
1. Scan the QR code on manual cover or search Reachfar in iOS store &Google play store to install the APP.
2. Enter the 10-figures ID number on the back of the device.The original password is "123456", click log in,and enter App, as shown in picture above:
Setting : Set parameters of the device(make sure that the device is online,otherwise the command can not be sent to the device.)as shown in photo on the right:
1.About the device : Check and edit information of the device.
2. Change password:Change log in password of the website platform and App.
3. Interval for uploading GPS location :
Adjust the time interval of GPS uploading location.The shorter time interval is, the more accurate the location is, meanwhile, the standby time is shorter. We suggest every 10 minutes or every hour uploading location.If you are tracking targets,adjust to every 30sec uploading location,when target found,turn back to 10 minutes or 1 hour to keep longer standby time.
4.Main monitoring number : The master number can send command and receive alarm.
5.The white list and phonebook : Only the phone numbers on white list or phonebook can call the phone number of the device for monitoring .
6.Sensor lights : When the environment gets dark, LED light flashes automatically, the wearer will be easier to be found.(factory setting shut down the LED lights to save standby time)
7.Time zone of software:This is for APP time , users can set it according to local time zone.
8.Device languages: The device's alarm SMS languages includes Chinese and English so far.
9.Remote reboot: Power on the device via APP
10.Remote power-off: Power off the device via APP.( once conduct remote power-off, users will be not able to remote power-on it. Please be cautious to use the function.)
Device message: A list shows alert information sent by the device.
Alarm reminders:Whether receive the pushed alert information from APP.
Log out : Log out the APP, and never get the alarm reminders via APP.